China K Series Low Noise Right Angle Helical Bevel Gearbox helical gearbox elecon

Item Description

 

Merchandise Description

 

Solution Description

-K Series Helical Bevel Gearbox

Merchandise Attributes
one. Enter method: Coupled motor, belted motor, enter shaft or relationship flange.
2. Output: Right angle
3. Compact construction. Rigid tooth encounter. Carrying better torque, large loading capacity.
four.Substantial precision equipment, ensuring the unit to operate stably, smooth transmission.
five. Lower noise, prolonged lifespan. Large overlap coefficient, abrasion resistant.

 

Merchandise Parameters

1. Technical data

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Input electricity rating(kw) .18~3 .eighteen~three .18~5.five .18~5.five .37~eleven .75~22 one.3~thirty 3~45 7.5~90 11~one hundred sixty eleven~two hundred eighteen.5~two hundred
Ratio five.36~
106.38
5.eighty one~
131.87
6.57~
145.fifteen
7.14~4
four.79
seven.22~
192.eighteen
7.19~
197.27
eight.95~
175.47
eight.74~
141.93
8.68~
146.07
twelve.sixty six~
one hundred fifty.03
17.35~
164.44
17.97~
178.37
Optimum Torque(N.m) two hundred four hundred 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

two: Design and style choice
 

K series gear units are available in the following designs
KAZ..Y.. Brief-flange-mounted helical-bevel equipment models with hollow shaft
K…Y… Foot-mounted helical-bevel equipment units with solid shaft
KAT…Y… Torque-arm-mounted helical-bevel equipment models with hollow shaft
KAB…Y… Foot-mounted helical-bevel equipment models with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft input helical-bevel gear units
KA…Y… Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel equipment units
KF…Y… Flange-mounted helical-bevel equipment units with solid shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft enter combinatorial helical-bevel gear models
KAF…Y… Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the special 1 ,the flange is needed to be linked

Supplies Data Sheet

 

Housing materials

Grey Forged iron

Housing hardness

HBS163~255

Gear substance

20CrMnTi alloy steel

Area hardness of gears

HRC58°~62 °

Gear main hardness

HRC33~48

Enter / Output shaft content

40Cr alloy metal

Input / Output shaft hardness

HRC32~36

Machining precision of gears

accurate grinding, 6~5 Grade

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Warmth remedy

tempering, cementiting, quenching, normalizing, and so forth.

Efficiency

94%~ninety six% (is dependent on the transmission stage)

Sound (MAX)

60~68dB

Temp. increase (MAX)

40°C

Temp. increase (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Brand of bearings

China best manufacturer bearing, HRB/LYC/ZWZ/C&U. Or other makes requested, SKF, FAG, INA, NSK.

Manufacturer of oil seal

NAK — ZheJiang or other brand names asked for

 

Comprehensive Photographs

 

 

Our approach of production

Our merchandise line

 

Business Profile

 

Company Profile

Bode  was launched in 2007, which is found in HangZhou metropolis, ZHangZhoug province. As 1 specialist manufacturer and exporter, we have a lot more than 17 years’ expertise in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare components. We have manufacturing unit with sophisticated generation and check products, the robust improvement of crew and creating capability provide our consumers with high high quality goods. Our items widely served to numerous industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, medication, wood and so on. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to question us any inquiries, excellent offer you constantly for you for prolonged expression business.

FAQ

Q1: Are you buying and selling business or manufacturer?
A: We are manufacturing facility.

Q2: What varieties of gearbox can you create for us?
A: Main items of our company: R, S, K, F sequence helical-tooth reducer, RV series worm equipment reducer,H Series Parallel Shaft Helical Reduction Equipment Box

Q3: Can you make as for every custom drawing?
A: Indeed, we offer you tailored provider for buyers.

This autumn: Can we acquire 1 laptop of each and every merchandise for quality testing?
A: Yes, we are happy to take trial buy for quality screening.

Q5: What info shall we give just before placing a acquire purchase?
A:  a) Kind of the gearbox, ratio, enter and output kind, enter flange, mounting placement, and motor informationetc.
     b) Housing coloration.
     c) Acquire quantity.
     d) Other particular requirements.

Q6: How prolonged is your shipping and delivery time?
A: Usually it is 5-10 days if the products are in inventory. or it is fifteen-20 times if the merchandise are not in stock.

Q7: What is your phrases of payment ?
A: 30% Advance payment by T/T right after signing the contract.70% just before delivery

If you are intrigued in our product, welcome to speak to with us.
Our staff will do our greatest to fulfill your require 🙂 
 

 

US $90-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw) 0.18~3 0.18~3 0.18~5.5 0.18~5.5 0.37~11 0.75~22 1.3~30 3~45 7.5~90 11~160 11~200 18.5~200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~4
4.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~
164.44
17.97~
178.37
Maximum Torque(N.m) 200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

###

K series gear units are available in the following designs
KAZ..Y.. Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y… Foot-mounted helical-bevel gear units with solid shaft
KAT…Y… Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y… Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft input helical-bevel gear units
KA…Y… Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel gear units with solid shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft input combinatorial helical-bevel gear units
KAF…Y… Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the special one ,the flange is required to be connected

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested
US $90-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw) 0.18~3 0.18~3 0.18~5.5 0.18~5.5 0.37~11 0.75~22 1.3~30 3~45 7.5~90 11~160 11~200 18.5~200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~4
4.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~
164.44
17.97~
178.37
Maximum Torque(N.m) 200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

###

K series gear units are available in the following designs
KAZ..Y.. Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y… Foot-mounted helical-bevel gear units with solid shaft
KAT…Y… Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y… Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft input helical-bevel gear units
KA…Y… Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel gear units with solid shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft input combinatorial helical-bevel gear units
KAF…Y… Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the special one ,the flange is required to be connected

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

How to Design a Helical Gearbox

Basically, a gear is a rotating circular machine part that has teeth cut into it to transmit torque or speed. Gears operate on a similar principle to levers. However, gears are usually asymmetrical in nature, and they have meshing teeth that work together to transmit torque or speed.helical gearbox

Helix angle

Whether you’re looking for a right angle gearbox or a helical gearbox, the angle of the teeth is an important consideration. It affects contact ratios, radial force and the torque capacity of the gear.
A helical gearbox uses the same basic elements as a spur gear, except it has teeth that are closer together. It is also more suited for high-load applications. It is also quieter than conventional gears. The main differences between a helical gearbox and a spur gear are its pitch and the helix angle.
The pitch of a helical gear is measured in the plane perpendicular to the direction of the teeth. It may also be called circular pitch. The pitch of a helical gear may be greater or less than circular pitch.
The normal pitch of a helical gear is also measured in the plane perpendicular to its direction of rotation. It is often called the reference value.
Unlike the spur gear, a helical gear does not have a unique optimum pressure angle. A helical gear’s contact ratio will decrease as the pressure angle increases. This is due to the fact that the length of the contact line decreases.
The pitch of a helical planetary gearbox can be calculated by dividing the total helix angle of the pinion and gear by the sum of their normal pressure angles. The helix angle is usually between 15 and 30 degrees.

Center distance

During the design of a helical gearbox, the center distance between the gears is a crucial input parameter. The center distance should be accurately calculated and modified based on the actual usage conditions. Undersized center distances cause a gear to mesh at a point other than the pitch point, which can lead to increased noise, premature wear and amplitude modulated vibrations.
The best way to calculate a helical gear’s center distance is to calculate the helix angle. This is often referred to as the fundamental rule of gearing. The helix angle is a mathematical expression that defines the relationship between the transverse and normal planes of the gear tooth. The pitch circle diameter increases with helix angle.
The number of teeth in a gear is also a relevant input parameter. There are a number of considerations to consider for determining the helix angle, such as the tooth depth, the pitch diameter, the number of teeth, and the radii of the index circle. The tooth depth is a useful way to calculate bottom clearance.
During the design of a helical mesh, the radial and axial thrust forces are produced. The angular backlash of a gear may vary depending on the type of gear, the pitch diameter and the transmission ratio. The total length of contact lines varies more gradually with the helix angle.
The number of cross sections in a helical mesh is also important. The radial module form is more economic to manufacture. The helical gearbox can be produced by using the same tooth cutting tools as spur gears.

Backlash

Having a smooth rotation of meshing gears is important. However, backlash is an issue that needs to be addressed. There are several ways of controlling backlash. The amount of backlash required depends on the application, size, and accuracy of the gears.
There are two basic ways of reducing backlash. The first is to decrease the distance between the gear centers. The second is to use spring loaded gears. The latter works better in low torque unidirectional drives.
The difference between the distances is called the transverse contact ratio. The longer the distance, the more rotational motion is required. The angular backlash is the opposite of the radial backlash.
The backlash may also be measured in terms of the angular distance between two gears. This measurement can be converted into an angular value at the operating pitch circle. A worm gear is another example.
Using the correct backlash calculator can determine the correct amount of backlash for your helical gearbox. The amount of backlash depends on the accuracy of the individual gears and the type of gearbox.
The gearbox also has components like pulleys, bearings, and wheels. There are several ways of reducing backlash, including the use of bolts and shims to decrease the center distance between gears. In heavy duty applications, a rigid bolted assembly is common.
To calculate the backlash of a geartrain, one must know the gear ratio of each gear in the train and how much it is mated to the reference shaft. This information is especially helpful for cumulative backlash.helical gearbox

Durability

Optimal design, materials, manufacturing, and maintenance procedures affect the lifecycle of a gear. This includes production, repair and replacement costs. The optimum maintenance schedule must also account for lifecycle costs.
The life of a gear can be extended by proper tooth tip relief. This will reduce wear, improve meshing, and increase the longevity of your gear.
The helical gearbox is a specialized type of gearbox, which transforms power from one right angle axis to another. Typical applications include automotive transmissions. It is a popular choice in applications with high speed, high load, or non-parallel shafts. It is quieter and smoother than spur gears. The modular production method used in helical gearboxes provides the best possible standard for component integrity and performance.
One of the most important components of a helical gearbox is the thrust bearings. These support the thrust forces created by the gears and can absorb some of them. A helical gearbox is best suited for high load applications that require a smooth gearing motion.
A good helical gearbox is one that is manufactured with bearings that can handle axial loading. A helical gearbox with a central gulley is often needed for tool clearance. The helix angle also has a bearing on its durability.
The helix angle is also the source of the largest thrust force produced by a helical gear. This large thrust force is produced by a series of special angle cut teeth. This may be one of the reasons why helical gears have been used in high speed applications.

Noise

Generally speaking, helical gears are considered to be a relative quieter gear than spur gears. It is estimated that a helical gear set with axial contact ratio of 2 is about 19 dB quieter than a spur gear set with the same contact ratio.
The term “whine” is often used to describe the tonal character of gear noise. This is a function of the dynamic forces that act on the gear mesh. The dynamic forces are related to rotational speed.
There are two main types of gear noise: the gear-specific noise and peripheral component noise. Both of these types can be caused by high-speed gears transmitting the power of an engine.
The gear-specific noise may be related to the number of teeth in contact. A low contact ratio can slow down the rotational speed of the driven gear. However, a high contact ratio will not reduce the transmission error. This is why it is important to prioritize your design intent before attempting any noise reduction measures.
The tonal character of gear noise can be determined by collecting and analyzing data over a period of time. This may include a series of tests at loads within the desired load range. This measurement can serve as a starting point for a gearbox’s root cause analysis.
The gear-specific noise has a number of mechanisms. These include the aforementioned transmission error signal and the gear-specific whine.helical gearbox

Applications

Various industries like plastics, printing, cement and other heavy industrial settings use helical gearboxes. Their advantages include low power consumption, quieter operation and high load application. However, there are some limitations. For example, heat generated by sliding contact is a hindrance to efficiency. It should also be noted that gear weight affects the performance of the gear.
There are two ways to mesh helical gears. The first method is to place the shafts oriented at a certain angle of helix, in a mesh. The second method is to place the shafts oriented in a different angle of helix. The difference in angle is referred to as the helix angle.
The helical gearbox is the most widely used gearbox. It is compact in size and works at a high efficiency. It is useful for driving conveyors, coolers and machines. It is also used in automation control systems.
Helical gears are often chosen over spur gears for non-parallel shafts. They are also used in gearboxes for automotive applications and in elevators. They also reduce vibrations.
The gears are made of special teeth that are angled to an axis. They are also cut at an angle. This allows for perpendicular meshing. They can be divided into two basic categories: crossed axis gears and single helical gears. Single helical gears can be right-handed or left-handed. Crossed axis gears are usually used to connect parallel shafts.
China K Series Low Noise Right Angle Helical Bevel Gearbox     helical gearbox eleconChina K Series Low Noise Right Angle Helical Bevel Gearbox     helical gearbox elecon
editor by czh 2023-01-04