China Helical Gear Gearbox Motor with Hollow Shaft helical cone gearbox

Item Description

Company  Profiles

     
-We are a foremost equipment motor manufacturer
ZHangZhoug Xihu (West Lake) Dis.hai Reducer is a leading company of gear motor and gearbox.
Considering that 1991, we have specialized in producing a broad range of gear motor and equipment box like:
 

 

  • helical equipment motor
  • helical bevel gear motor
  • parallel shaft helical equipment motor
  • helical worm gear motor
  • hoist generate
  • weighty-duty helical gearbox
  • heavy-responsibility helical bevel gearbox
  • gear motor for vehicle parking program
  • sprial bevel gearbox

Merchandise Description
 

P sequence equipment motor is composed with two-stage or a few-phase gears. Input shaft and output shaft is parallel.

Mounting place: footed mounting, flange mounting, shaft mounting and so on.

Complex information:

output pace:    10 ~ 752 rpm

rated output torque:10 ~ 20000 Nm

motor electricity:  0.twelve ~ 200 KW

Item Show

Item Specification

 

Product characteristics
1. P collection parallel shaft helical equipment motor are the ideal remedy when set up place is restricted under the same permitted torque.
2. Little vibration and lower sound, with large transmission performance.
3. The many diverse sizes and patterns make certain that the gearmotors can be used in a vast range of purposes even below the most unfavorable conditions,typically utilized in conveyor and resources processing programs.
General Technological data
Housing content HT250 high-toughness forged iron
Housing hardness HBS190-240
Pinion substance 20CrMnTiH
Gear material 20CrMnTiH
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~forty
Input/output shaft material 40CrMnTiH
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~7 Grade
Lubricating oil GB L-CKC220
Heat treatment tempering, cementiting, quenching, and many others.
Efficiency 94%~96% (depends on the transmission stage) 
Noise (MAX) 60~68dB
Temp. rise  (MAX) 40°C 
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China Leading manufacturer C&U,LYC,TMB or other manufacturers asked for, SKF…..
Brand of oil seal CTY— ZheJiang or other brands asked for
P —- collection parallel shaft helical equipment motor
P-series single stages
Model Output Shaft Dia. Middle Peak Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Reliable (mm)  (mm) (mm) (kw) (Nm) (RPM)
P37 25k6 112h13 one hundred ten/one hundred sixty .12~3 three.88~a hundred thirty 240 10~374
P47 30k6 128.1h13 one hundred thirty/two hundred .12~three nine.15~622 435 2.2~157
P57 35k6 136h13 180/250 .twelve~5.five 5.21~200 605 6.5~276
P67 40k6 159.5h13 a hundred and eighty/250 .18~5.5 4.14~225 830 five.7~360
P77 50k6 200h13 230/three hundred .twenty five~11 four.28~280 1720 three.1~336
P87 60m6 246.7h13 250/350 .37~22 four.thirteen~1300 3060 1.1~356
P97 70m6 285h13 350/450 1.1~thirty four.fifty two~253 4400 3.6~131
P107 90m6 332.4h13 350/450 one.1~45 six.29~253 8990 2.7~236
P127 110m6 382.6h13 450/550 4.~90 four.eighty four~176 13800 four.2~316
P157 120m6 447h13 550/660 5.5~200 twelve.5~207 25710 3.3~a hundred twenty five
 
P collection double stages 
Model Output Shaft Dia. Middle Top Output Flange Dia. Energy Ratio Permitted Torque Output Speed 
Reliable (mm)  (mm) (mm) (kw) (Nm) (RPM)
P37D17 25k6 112h13 110/one hundred sixty .twelve~.eighteen 129~322 one hundred ninety 4~10
P47D17 30k6 128.1h13 one hundred thirty/two hundred .twelve~.18 178~622 four hundred two.2~7.four
P57D37 35k6 136h13 one hundred eighty/250 .12~.37 134~967 615 1.4~ten
P67D37 40k6 159.5h13 180/250 .twelve~.55 a hundred seventy five~1429 900 .9~eight
P77D37 50k6 200h13 230/300 .twelve~.seventy five 280~2613 1690 .fifty one~4.9
P87D57 60m6 246.7h13 250/350 .12~1.five 249~4954 3070 .28~5.seven
P97D57 70m6 285h13 350/450 .twelve~2.2 363~7348 4390 .19~3.9
P107D77 90m6 332.4h13 350/450 .12~4. 255~14767 9630 .09~5.6
P127D77 110m6 382.6h13 450/550 .12~5.five 376~22323 13500 .06-3.eight
P127D87 110m6 382.6h13 450/550 5.5~eleven 166~418 13500 3.4~8.seven
P157D97 120m6 447h13 550/660 .fifty five~eleven 197~6295 19710 .22~7.3
Remarks: remember to refer to our catalogue or request for sales guy when your specialized needs is    unique.

Bundle

Plastic bag + wooden carton

Certificate

FAQ

Q: Can you print other hues?
Indeed. Personalized coloration can be printed on the equipment motor in accordance to your requirements.
Q: Is that factory cost?
Yes. We guarantee you all costs are dependent on manufacturing unit.
Q:  What is the existence span? what is the promise
The lifespan of equipment motor can reach 5-20 years dependent on different working circumstances .The promise time is 1 yr right after delivery.
Q: What paperwork are obtainable?
A entire variety paperwork such as structural drawings, packing listing, installation manual and relative certificates can be presented. Moreover, customs declaration is provided. We supply 1-cease services for you. 
Q: Is it CZPT to tailored?
of course, we could re-design and style and generate the gear motor as your requirements if the amount is large.

US $500-1,500
/ Set
|
1 Set

(Min. Order)

###

Application: Motor, Machinery, Transmission Equipment/ Crane
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Shunting
Gear Shape: Bevel
Step: Three-Step

###

Customization:

###

Product features
1. P series parallel shaft helical gear motor are the perfect solution when installation space is limited under the same permitted torque.
2. Little vibration and low noise, with high transmission efficiency.
3. The many different sizes and designs ensure that the gearmotors can be used in a wide variety of applications even under the most unfavorable conditions,typically used in conveyor and materials processing applications.
General Technical data
Housing material HT250 high-strength cast iron
Housing hardness HBS190-240
Pinion material 20CrMnTiH
Gear material 20CrMnTiH
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input/output shaft material 40CrMnTiH
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~7 Grade
Lubricating oil GB L-CKC220
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage) 
Noise (MAX) 60~68dB
Temp. rise  (MAX) 40°C 
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China Top brand C&U,LYC,TMB or other brands requested, SKF…..
Brand of oil seal CTY— Taiwan or other brands requested
P —- series parallel shaft helical gear motor
P-series single stages
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
P37 25k6 112h13 110/160 0.12~3 3.88~130 240 10~374
P47 30k6 128.1h13 130/200 0.12~3 9.15~622 435 2.2~157
P57 35k6 136h13 180/250 0.12~5.5 5.21~200 605 6.5~276
P67 40k6 159.5h13 180/250 0.18~5.5 4.14~225 830 5.7~360
P77 50k6 200h13 230/300 0.25~11 4.28~280 1720 3.1~336
P87 60m6 246.7h13 250/350 0.37~22 4.13~1300 3060 1.1~356
P97 70m6 285h13 350/450 1.1~30 4.52~253 4400 3.6~131
P107 90m6 332.4h13 350/450 1.1~45 6.29~253 8990 2.7~236
P127 110m6 382.6h13 450/550 4.0~90 4.84~176 13800 4.2~316
P157 120m6 447h13 550/660 5.5~200 12.5~207 20250 3.3~125
 
P series double stages 
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
P37D17 25k6 112h13 110/160 0.12~0.18 129~322 190 4~10
P47D17 30k6 128.1h13 130/200 0.12~0.18 178~622 400 2.2~7.4
P57D37 35k6 136h13 180/250 0.12~0.37 134~967 615 1.4~10
P67D37 40k6 159.5h13 180/250 0.12~0.55 175~1429 900 0.9~8
P77D37 50k6 200h13 230/300 0.12~0.75 280~2613 1690 0.51~4.9
P87D57 60m6 246.7h13 250/350 0.12~1.5 249~4954 3070 0.28~5.7
P97D57 70m6 285h13 350/450 0.12~2.2 363~7348 4390 0.19~3.9
P107D77 90m6 332.4h13 350/450 0.12~4.0 255~14767 9630 0.09~5.6
P127D77 110m6 382.6h13 450/550 0.12~5.5 376~22323 13500 0.06-3.8
P127D87 110m6 382.6h13 450/550 5.5~11 166~418 13500 3.4~8.7
P157D97 120m6 447h13 550/660 0.55~11 197~6295 19710 0.22~7.3
Remarks: please refer to our catalogue or ask for sales man when your technical requirements is    special.
US $500-1,500
/ Set
|
1 Set

(Min. Order)

###

Application: Motor, Machinery, Transmission Equipment/ Crane
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Shunting
Gear Shape: Bevel
Step: Three-Step

###

Customization:

###

Product features
1. P series parallel shaft helical gear motor are the perfect solution when installation space is limited under the same permitted torque.
2. Little vibration and low noise, with high transmission efficiency.
3. The many different sizes and designs ensure that the gearmotors can be used in a wide variety of applications even under the most unfavorable conditions,typically used in conveyor and materials processing applications.
General Technical data
Housing material HT250 high-strength cast iron
Housing hardness HBS190-240
Pinion material 20CrMnTiH
Gear material 20CrMnTiH
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input/output shaft material 40CrMnTiH
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~7 Grade
Lubricating oil GB L-CKC220
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage) 
Noise (MAX) 60~68dB
Temp. rise  (MAX) 40°C 
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China Top brand C&U,LYC,TMB or other brands requested, SKF…..
Brand of oil seal CTY— Taiwan or other brands requested
P —- series parallel shaft helical gear motor
P-series single stages
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
P37 25k6 112h13 110/160 0.12~3 3.88~130 240 10~374
P47 30k6 128.1h13 130/200 0.12~3 9.15~622 435 2.2~157
P57 35k6 136h13 180/250 0.12~5.5 5.21~200 605 6.5~276
P67 40k6 159.5h13 180/250 0.18~5.5 4.14~225 830 5.7~360
P77 50k6 200h13 230/300 0.25~11 4.28~280 1720 3.1~336
P87 60m6 246.7h13 250/350 0.37~22 4.13~1300 3060 1.1~356
P97 70m6 285h13 350/450 1.1~30 4.52~253 4400 3.6~131
P107 90m6 332.4h13 350/450 1.1~45 6.29~253 8990 2.7~236
P127 110m6 382.6h13 450/550 4.0~90 4.84~176 13800 4.2~316
P157 120m6 447h13 550/660 5.5~200 12.5~207 20250 3.3~125
 
P series double stages 
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
P37D17 25k6 112h13 110/160 0.12~0.18 129~322 190 4~10
P47D17 30k6 128.1h13 130/200 0.12~0.18 178~622 400 2.2~7.4
P57D37 35k6 136h13 180/250 0.12~0.37 134~967 615 1.4~10
P67D37 40k6 159.5h13 180/250 0.12~0.55 175~1429 900 0.9~8
P77D37 50k6 200h13 230/300 0.12~0.75 280~2613 1690 0.51~4.9
P87D57 60m6 246.7h13 250/350 0.12~1.5 249~4954 3070 0.28~5.7
P97D57 70m6 285h13 350/450 0.12~2.2 363~7348 4390 0.19~3.9
P107D77 90m6 332.4h13 350/450 0.12~4.0 255~14767 9630 0.09~5.6
P127D77 110m6 382.6h13 450/550 0.12~5.5 376~22323 13500 0.06-3.8
P127D87 110m6 382.6h13 450/550 5.5~11 166~418 13500 3.4~8.7
P157D97 120m6 447h13 550/660 0.55~11 197~6295 19710 0.22~7.3
Remarks: please refer to our catalogue or ask for sales man when your technical requirements is    special.

What Is a Helical Gearbox?

Generally, the gear is a rotating circular machine part, and its purpose is to transmit speed and torque. It works by meshing with other toothed parts. This type of gear is made up of cut teeth, inserted teeth, and gear teeth.helical gearbox

Helix angle

Typical helical gearbox angle ranges from 15 to 30 degrees. It is commonly used in worm gears and screws. The angle is important in motion conversion and power transfer.
Helical gearboxes are suitable for high load applications. Because the teeth engage more gradually, helical gearboxes require bearings that can manage axial loading. In fact, the forces produced by helical gears are much less than those of spur gears. Moreover, helical gearboxes are often less efficient.
There are two basic gear systems: the spur gear system and the helical gear system. These systems are similar in their basic functions. However, they are distinguished by a number of important differences. The spur gear system produces thrust forces, while the helical gear system transmits energy through two axial configurations. Both systems operate at speeds of around 50m/s.
Spur gears have a common pitch, whereas helical gears have a different pitch. The pitch of helical gears changes as the helix angle changes. This leads to a difference in the diameter of the gear and the hobs. This changes the radial module system pitch and increases the manufacturing costs.
The normal pressure angle is the angle of the load line into the plane normal to the tooth axis. This angle is sometimes called the reference value.
Helical gears are available in both left-hand and right-hand configurations. Helical gears are typically characterized by quiet operation and higher power carrying capacity. They are also appreciated for their NVH characteristics. They are used in the oil, food, and plastic industries. They also have a higher efficiency than zero-helix angle gears.

Efficiency

Using helical gears in a gearbox provides several benefits. They are more efficient, quieter and better able to handle high load cases. However, they are also more expensive than classic gears.
The efficiency of a helical gearbox is calculated by measuring the efficiency of the entire working area. This is measured using a predefined measuring grid. The result is presented by an efficiency contour map. It shows that efficiency is not uniform in the working area.
This is because of the varying angles of the teeth of the gears. It is also important to consider the size of the pitch circle and the angle of the helix. The pitch circle is larger for helical gears than for spur gears. This means more surface contact and more potential for transmission of power between the parallel shafts.
Efficiency calculations for synchronizers are relatively new. Using data from power losses can help estimate the accuracy of these calculations.
The efficiency of a gearbox is mainly dependent on the power range and the torque. The higher the range, the better the efficiency. When the power range is reduced, the efficiency is reduced. The efficiency decreases sharply for high ratio gearboxes.
The efficiency of a gearbox also depends on the type of gearbox. Typically, spur gears are the most efficient, but helical gears are also quite efficient. In the same way that an electrical motor is more efficient than a standard cylinder engine, helical gears are more efficient than spur gears.helical gearbox

Applications

Various industries utilize helical gearboxes for different applications. These gears are primarily used in heavy industrial settings and are also used in the printing and plastic industries.
They are useful in transferring motion between parallel and right-angle shafts. Helical gears are more durable and offer smoother gear operation than other gear types. They are also less noisy and produce less friction.
Typical applications of helical gearboxes include conveyors, coolers, crushers, and other heavy industrial applications. They are also used in the food, chemical, and printing industries.
There are two main types of helical gearboxes: single helical gearboxes and double helical gearboxes. In the single gearbox, the teeth are at a certain angle to the axis. In the double gearbox, the teeth are at opposite angles.
Both gear types have their own advantages. The spur type is more suited for low-speed applications and is also less expensive to manufacture. However, helical gears are more efficient. They are also less noisy and have more teeth meshing capacity.
Helical gears also have a greater pitch circle diameter than spur gears. Because of this, they can tolerate a greater load and are more durable. The helical gearbox also uses thrust bearings to support the thrust force. In order to ensure smooth operation, the helical gears gradually engage.
Helical gears are also used in the automotive industry. They are the most common gear type used in the automotive transmission process.

Spiral teeth vs helical teeth

Depending on the application, there are two types of bevel gears: helical gears and spiral teeth bevel gears. They have a similar geometry, but they perform differently. While helical gears provide smoother operation and higher load carrying capacity, spiral teeth bevel gears are more flexible, reduce the risk of overheating, and have longer service life.
Helical gears are primarily used for helical or crossed shafts. They have teeth that are cut at a precise angle to the gear axis. They provide a smooth action during heavy loads and are used at high speeds. They can also be used for non-parallel shafts. However, they are less efficient than spur gears.
Spur gears are primarily used for parallel shafts. Their straight teeth are parallel to the gear axis. Their teeth come in sudden contact, which causes vibration and a noticeable noise. However, helical gears provide gradual engagement, minimizing vibration and backlash.
The root stress of helical gears is different from spur gears. It is dependent on the helix angle and the web thickness of the gear. The pressure angle of the teeth also affects the curvature radii. These factors affect the transverse contact ratio, which decreases the length of the contact line.
Helical gears are often used to change the angle of rotation by 90 degrees. They can also be used to eliminate shock loading. These gears can be used on parallel or crossed shafts.

PB and PLB Series

PB and PLB series helical gearboxes offer a bevy of benefits that include high power density and a compact modular design. Aside from offering a high output torque, they also offer low maintenance and a long life span. The manufacturers have also gone to great lengths to provide a robust case, a rigid worm and screw thread arrangement and a high reduction ratio. They also provide parallel shaft input options. This means you can use one gearbox to drive a whole train of synchronized gears.
Aside from the fact that it is one of the most durable gearboxes available, it is also one of the most versatile. In fact, the company manufactures a number of gearbox variants, ranging from a single gearbox to a fully modular multiple gearbox design. The high power density means it can operate in tight industrial spaces. PB and PLB series helical Gearboxes are available in a range of sizes, ensuring you find the perfect fit for your application. The PB and PLB Series helical gearboxes are also a cost-effective option for your next application. The company is also able to offer custom solutions to meet your specific needs.
The best part is that you can get your hands on these Gearboxes at a price that is well worth your hard earned dollars. The manufacturers also offer an industry leading warranty. PB and PLB series helical and worm gearboxes are available in a variety of sizes and configurations to suit your application.helical gearbox

Herringbone gears

Using Herringbone gears in helical gearboxes can give the advantages of quiet operation at high speed and minimal axial force. These gears can also be used in heavy machinery applications. However, manufacturing them is more difficult and expensive.
Herringbone gears are similar to double helical gears, except that they do not have a central gap. Originally, they were made by casting to an accurate pattern.
Today, they are characterized by two sets of gear teeth that are stuck together. They have a very high coincidence, which increases the bearing capacity of the gearbox. They also reduce wear and noise.
These gears are usually smaller than double helical gears. This makes them ideal for applications where vibration is high. The large contact area reduces stress. They also have a high carrying capacity. They are used in transmissions, heavy machinery, and differentials.
Herringbone gears are also used in torque gearboxes, especially those that do not have a significant thrust bearing. However, their use is less common because of manufacturing difficulties.
There are several solutions to the problem of making herringbone gears. One solution is to use a central groove to cut the gears. Another is to stack two helical gears together. Another solution is to use older machines that can be rebuilt to make herringbone gears.
Herringbone gears can be processed using milling methods. However, this method cannot be used to process all herringbone gears.
China Helical Gear Gearbox Motor with Hollow Shaft     helical cone gearboxChina Helical Gear Gearbox Motor with Hollow Shaft     helical cone gearbox
editor by czh 2023-01-14